Driveway Gravel Calculator
Calculate gravel for base and surface layers of a driveway.
A 20′ × 10′ driveway with a 4″ crusher run base and a 2″ #57 surface needs about 3.70 cubic yards — 5.17 short tons — before allowances. Cubic yards = area (ft²) × depth (ft) ÷ 27, applied to each layer and added together.
Last updated: November 9, 2026
Driveway Gravel Calculator Overview
A typical 20′ × 10′ driveway with a 4″ crusher run base and a 2″ #57 surface needs about 3.70 cubic yards (5.17 short tons) before allowances.
Gravel is typically sold by the cubic yard or by the ton. The calculator converts your dimensions into the quantity you need, accounting for material density and compaction.
- Select your material from presets or enter a custom density (lb/ft³).
- Choose your layer configuration: base only, surface only, or base + surface.
- Enter your driveway dimensions (length × width, or diameter for circular driveways).
- Select depth in inches (base typically 4″, surface typically 2″).
- The calculator shows cubic yards, tons, bag counts, and pallet breakdown.
How many cubic yards of gravel does a driveway need?
A 20′ × 10′ driveway (200 ft²) with a 4″ base and a 2″ surface needs 3.70 cubic yards. Calculate each layer separately with cubic yards = area (ft²) × depth (ft) ÷ 27, then add them: 200 × 0.333 ÷ 27 = 2.47 yd³ of base and 200 × 0.167 ÷ 27 = 1.23 yd³ of surface.
- Measure the finished length and width in feet, or the diameter for a circular driveway.
- Convert each layer depth from inches to feet by dividing by 12: 4″ = 0.333 ft and 2″ = 0.167 ft.
- Divide the layer volume in cubic feet by 27 to get cubic yards, then add the base and surface totals.
How do you convert cubic yards of driveway gravel to tons?
Short tons = cubic yards × 27 × density (lb/ft³) ÷ 2,000. At the calculator's densities, the 2.47 yd³ crusher run base (105 lb/ft³) weighs 3.50 short tons and the 1.23 yd³ #57 surface (100 lb/ft³) weighs 1.67 short tons, for 5.17 short tons in total. Metric tonnes = short tons × 0.907.
Density is the only material-specific input: #57 stone is taken as 100 lb/ft³, crusher run and #304 as 105 lb/ft³, and pea gravel as 105 lb/ft³. Confirm the figure on the delivery ticket if your supplier publishes one.
Material Selection
Choose crusher run or #304 (105 lb/ft³) for the base, and #57 stone (100 lb/ft³) or pea gravel (105 lb/ft³) for the surface.
Pea Gravel (105 lb/ft³):
- Decorative, smooth rounded stones
- Typically used for paths and decorative areas
- Less compaction, more shifting under vehicle weight
#57 Stone (100 lb/ft³):
- ¾″–1″ crushed stone, good drainage
- Common for driveway surface
- Interlocks when compacted, stable under traffic
Crusher Run / 304 Stone (105 lb/ft³):
- Crushed stone with fines, compacts densely
- Ideal for base/subgrade layer
- Provides stable foundation and frost protection
Custom density:
- Enter your material's lb/ft³ if different from presets
- Common ranges: 95–130 lb/ft³ depending on rock type
Layer Configuration
Build a 4″ base of crusher run or #304 and a 2″ surface of #57 stone, for 6″ total; heavy vehicles or weak soil may need 8–12″.
Base layer (recommended 4″):
- Material: Crusher Run or 304 Stone
- Purpose: Load distribution, frost protection, stable foundation
- Typical depth: 4″ (range 3-6″ depending on soil conditions)
Surface layer (recommended 2″):
- Material: #57 Stone or Pea Gravel
- Purpose: Driving surface, drainage, aesthetics
- Typical depth: 2″ (range 1.5-3″)
Total typical thickness:
- 6″ total (4″ base + 2″ surface) for most residential driveways
- Heavier vehicles or poor soil may require 8-12″ total
Depth Guide
Use 4″ of base and 2″ of surface for most residential driveways; drop to 3″ base on stable, well-drained soil or rise to 6″ for weak soil and heavy loads.
Base:
- 4″ Crusher Run / 304 Stone — most common
- 3″ for stable, well-drained soil
- 6″ for weak soil or heavy vehicle load
Surface:
- 2″ #57 Stone — most common
- 1.5″ for low-traffic areas
- 3″ for heavier loads or softer material
How much does driveway gravel delivery cost?
Delivery is often included in a delivered per-ton price. When a yard bills it separately, HomeAdvisor's planning guidance is about $5 per mile, so a 10-mile delivery is roughly $50 on top of the material.
Many yards charge by the load or apply a minimum order, and a truck that cannot reach the site may mean bulk bags or a smaller vehicle. Ask for the delivery line separately and confirm truck size and access before ordering. The driveway cost guide breaks down material, delivery and labour ranges.
Bag and Pallet Breakdown
A 50 lb bag is standard, 40 bags make a short ton, and 4 cubic yards of #57 stone is about 216 bags or 6 pallets.
Bag sizes:
- 50 lb bags (most common for pickup truck loads)
- 40 lb bags (sometimes available)
- 25 kg bags (metric, ~55 lb)
Pallet config:
- 40 bags per pallet (50 lb bags)
- ~1 short ton (2,000 lb) = 40 bags
- 1 metric tonne (2,205 lb) ≈ 44 bags (50 lb equivalent)
Example: 4 cubic yards of #57 stone (100 lb/ft³) = 108 ft³ = 10,800 lb ≈ 5.40 short tons ≈ 216 bags (50 lb) ≈ 6 pallets (5 full + 16 loose bags at 40 bags/pallet).
FAQ
- How much gravel do I need for a driveway?
- Depends on dimensions and depth. For a 20′ × 10′ driveway (200 ft²) with 4″ crusher run base (105 lb/ft³) + 2″ #57 stone surface (100 lb/ft³): ~3.70 cubic yards total (~3.50 short tons base + 1.67 short tons surface, before allowances).
- What's the best gravel for a driveway base?
- Crusher Run or 304 Stone — compacts densely, provides stable foundation and frost protection.
- How many tons of gravel per square foot?
- At 4″ depth (105 lb/ft³): ~1.75 short tons per 100 ft². At 2″ depth (100 lb/ft³): ~0.83 short tons per 100 ft². Varies with material density and compaction.
- How many bags of gravel equal a cubic yard?
- Approx. 54 bags of 50 lb gravel per cubic yard (for density ~100 lb/ft³).
- Do I need a permit for a gravel driveway?
- Check with your local municipality. Some areas require permits for driveways over a certain size or that affect drainage.
Related calculators
Use the French drain, crushed stone or bag calculator for the next part of the project.
Embed this calculator
Site owners can add the free gravel calculator to their own pages with a single iframe. The attribution link under the widget has to stay in place.
<iframe src="https://www.progravelcalculator.online/gravel-calculator-widget.html"
width="100%" height="520" style="border:0;max-width:100%"
title="Gravel calculator widget" loading="lazy"></iframe>
<p><a href="https://www.progravelcalculator.online/">Gravel Calculator</a> by Pro Gravel Calculator</p>
Full install notes: embed the gravel calculator.
Reference data: gravel density chart · driveway cost guide.