Pea Gravel Calculator
Estimate cubic yards, tons, bags and cost for paths, patios, playgrounds and borders.
A 10 ft × 10 ft area at 3 inches deep needs 0.93 cubic yards of pea gravel — about 1.31 short tons or 53 × 50 lb bags at 105 lb/ft³. Cubic yards = area (ft²) × depth (ft) ÷ 27.
Last updated: November 9, 2026
How much pea gravel do I need?
A 10 ft × 10 ft area at 3 in deep needs about 0.93 cubic yards, 1.31 short tons or 53 × 50 lb bags of pea gravel at the calculator's 105 lb/ft³ density assumption. The formula is length × width × depth in feet ÷ 27 for cubic yards.
Default example (10 ft × 10 ft at 3 in):
- Area: 10 ft × 10 ft = 100 ft²
- Depth: 3 in ÷ 12 = 0.25 ft
- Volume: 100 ft² × 0.25 ft = 25 ft³
- Cubic yards: 25 ft³ ÷ 27 = 0.93 yd³
- Weight: 25 ft³ × 105 lb/ft³ = 2,625 lb = 1.31 short tons
- Bags: 2,625 lb ÷ 50 lb = 52.5, rounded up to 53 bags
The calculator rounds bag counts up so you do not run short. Enter your own dimensions, depth and optional waste or compaction allowance above for a project-specific estimate.
How to calculate pea gravel for a path or patio
Measure the area in feet, convert the depth from inches to feet, multiply to find cubic feet, then divide by 27. For a 20 ft × 4 ft path at 2 in deep: 20 × 4 = 80 ft²; 2 in ÷ 12 = 0.1667 ft; 80 × 0.1667 = 13.33 ft³; 13.33 ÷ 27 = 0.49 yd³. At 105 lb/ft³ that is 1,400 lb, or 0.70 short tons and 28 × 50 lb bags.
Add a waste allowance for spillage, uneven ground and settlement. A 10% waste allowance turns 0.49 yd³ into 0.54 yd³ (about 1,512 lb, 0.76 short tons and 31 bags). Compaction is applied after waste, not added to it: the calculator multiplies by (1 + waste%) and then by (1 + compaction%).
For circular areas, use π × radius² × depth. For an L-shaped area, split it into two rectangles, calculate each, and add the volumes. The calculator above handles all three shapes.
How deep should pea gravel be?
Most decorative and pedestrian uses need 2–3 in of pea gravel. Playgrounds are different: the CPSC guidance is based on a compressed depth of 9 in for a fall height up to 5 ft, with an initial fill of about 12 in to allow for compression.
| Project | Typical depth | Notes |
|---|---|---|
| Garden path or walkway | 2–3 in | Use edging to stop the stones spreading. |
| Patio surface | 2–3 in | Compact the base first; pea gravel is a loose surface. |
| Decorative border | 2 in | A thinner skim is enough for visual cover. |
| Playground | 9 in compressed | Start near 12 in; CPSC lists protection to a 5 ft fall height. |
| Driveway surface | Not recommended alone | Rounded stones shift under vehicle loads; use angular stone. |
Depth ranges are planning guidance for typical residential projects. Local site conditions, edging and drainage can change the right depth.
Pea gravel for playgrounds: CPSC safety depths
The CPSC Public Playground Safety Handbook lists 9 in of compressed pea gravel as protecting to a fall height of 5 ft, not 7 ft. Because loose fill compresses at least 25% over time, the initial fill should be about 12 in so the maintained depth stays at 9 in.
- Maintain at least 9 in of compressed pea gravel under and around the equipment.
- Check depth regularly, especially under swings and at slide exits where material displaces.
- Use containment edging and plan for drainage so the material does not wash away.
- Do not install loose fill over concrete or asphalt.
- Pea gravel is not impact-tested in the same way as engineered wood fiber or rubber surfacing. Check the equipment manufacturer's requirements and local rules.
The calculator's playground preset uses depth as an input, but it cannot certify a playground. If the fall height is above 5 ft, use a surfacing material with a documented critical-height rating for that height.
Source: U.S. Consumer Product Safety Commission, Public Playground Safety Handbook (Publication 325), Table 2. Accessed November 9, 2026. cpsc.gov/s3fs-public/325.pdf
Pea gravel vs crushed stone
Pea gravel is rounded and smooth; crushed stone is angular. That shape difference matters more than color: angular stone interlocks and drains well under traffic, while pea gravel shifts and is better for loose decorative surfaces and playground fill.
| Property | Pea gravel | Crushed stone (#57) |
|---|---|---|
| Particle shape | Rounded, smooth | Angular, rough |
| Calculator density | 105 lb/ft³ | 100 lb/ft³ |
| 50 lb bags per yd³ | About 57 | About 54 |
| Traffic performance | Shifts under tires; not ideal for driveways | Interlocks when compacted; good for driveways and drainage |
| Best uses | Paths, patios, borders, playgrounds | Driveways, base layers, French drains |
Densities are the calculator's planning assumptions. Supplier test data always wins.
How many bags of pea gravel are in a cubic yard?
At 105 lb/ft³, one cubic yard of pea gravel weighs about 2,835 lb. Divide that by the bag weight: about 57 × 50 lb bags, 71 × 40 lb bags or 48 × 60 lb bags per cubic yard. Bag counts are rounded up.
| Bag size | Bags per cubic yard | Bags per short ton |
|---|---|---|
| 50 lb | About 57 | 40 |
| 40 lb | About 71 | 50 |
| 60 lb | About 48 | 34 |
The "bags per short ton" column depends only on bag size, not material: 2,000 lb ÷ 50 lb = 40 bags, 2,000 ÷ 40 = 50, and 2,000 ÷ 60 = 33.3, rounded up to 34. The bag calculator handles pallet counts and bulk-vs-bag comparisons.
What does pea gravel cost?
This calculator does not publish a default price because delivered gravel prices vary by region, quantity, supplier and season. Enter the price per short ton your supplier quoted, add any delivery fee and tax rate, and the calculator shows an estimated total. If you leave the price blank, the cost card stays hidden.
For a fair comparison, ask suppliers for a delivered price that includes:
- Material cost per ton or cubic yard.
- Delivery fee and minimum order size.
- Tax and any fuel or handling surcharge.
- Whether the price is based on short tons (2,000 lb) or metric tonnes (1,000 kg).
Bagged pea gravel usually costs more per ton than bulk delivery, but bags can be practical for small areas or sites with limited truck access. Compare the total delivered cost, not just the shelf price.
Common pea gravel mistakes
The most common errors are confusing cubic feet with cubic yards, skipping the 10% waste allowance, and expecting rounded pea gravel to lock together under a vehicle.
- Using cubic feet as cubic yards. Divide cubic feet by 27 before ordering. A 100 ft² area at 3 in is 25 ft³, or 0.93 yd³.
- Skipping waste. Uneven ground, edging gaps and spillage are normal. A 10% allowance is a reasonable starting point.
- Assuming pea gravel is a playground safety certificate. CPSC lists 9 in compressed for a 5 ft fall height; deeper or higher equipment needs a documented impact-tested surface.
- Using pea gravel as a driveway base. Rounded stones do not interlock under vehicle loads. Use crusher run or #304 for the base and angular stone for the surface.
- Forgetting containment. Without edging, pea gravel spreads into lawns and drains.
Frequently asked questions
- How much pea gravel do I need?
- Multiply length × width × depth in feet, then divide by 27. A 10 ft × 10 ft area at 3 in deep needs about 0.93 yd³, 1.31 short tons or 53 × 50 lb bags.
- How deep should pea gravel be for a playground?
- CPSC lists 9 in of compressed pea gravel for a fall height up to 5 ft. Start with about 12 in and maintain at least 9 in.
- How many bags are in a cubic yard of pea gravel?
- About 57 × 50 lb bags, 71 × 40 lb bags or 48 × 60 lb bags at 105 lb/ft³.
- How many tons is a cubic yard of pea gravel?
- About 1.42 short tons or 1.29 metric tonnes at 105 lb/ft³. Confirm the supplier's density before ordering.
- What is pea gravel best used for?
- Paths, patios, decorative borders and playground surfacing. It is not the best choice for a driveway base.
- Does pea gravel compact?
- It settles but does not interlock like angular crushed stone. Plan for settlement and maintain playground depth.
Sources and assumptions
- Density: 105 lb/ft³ (about 1,682 kg/m³) is the calculator's typical loose bulk density for pea gravel. Supplier test data should replace this value when available.
- Playground guidance: U.S. Consumer Product Safety Commission, Public Playground Safety Handbook (Publication 325), Table 2. cpsc.gov/s3fs-public/325.pdf. Accessed November 9, 2026.
- Formulas: volume = area × depth; short tons = cubic feet × density ÷ 2,000; bags = weight ÷ bag size, rounded up.
Related calculators
Use the tons, bag or crushed stone calculator for the next part of the project.
Embed this calculator
Site owners can add the free gravel calculator to their own pages with a single iframe. The attribution link under the widget has to stay in place.
<iframe src="https://www.progravelcalculator.online/gravel-calculator-widget.html"
width="100%" height="520" style="border:0;max-width:100%"
title="Gravel calculator widget" loading="lazy"></iframe>
<p><a href="https://www.progravelcalculator.online/">Gravel Calculator</a> by Pro Gravel Calculator</p>
Full install notes: embed the gravel calculator.
Reference data: gravel density chart · best gravel types.