Pro Gravel Calculator

Cost guide

How much does a gravel driveway cost in 2026?

Published U.S. ranges put a gravel driveway at about $1.25 to $4.00 per square foot installed. A national average of roughly $1,800 is a useful anchor, but the spread is wide because grading, delivery, drainage and access often cost more than the stone.

By Pro Gravel Calculator · · Method & sources

The short answer

  • Most projects: about $500 to $3,500, with a national average near $1,800 (Angi, 2026).
  • Per square foot: about $1.25 to $4.00 installed (HomeAdvisor planning range); smaller jobs usually sit higher per square foot.
  • A 400–600 sq ft double-car driveway: about $800 to $2,200 installed (Angi, 2026).
  • The stone itself: often a minority of the total. Crushed stone had a median published price of $31 per ton in October 2026, before delivery.

These are published national planning ranges, not a quotation for your property. Local labor, haul distance and site conditions can move the number substantially.

Cost summary

Installed gravel driveways cost about $1.25–$4.00 per square foot; most projects fall between $500 and $3,500, with a national average near $1,800.

Published U.S. gravel driveway cost ranges and what they cover
Item Published planning range What it covers
Installed total $1.25–$4.00 / sq ft Material, delivery, grading, labor and compaction, depending on scope (HomeAdvisor, 2025 data).
Most projects $500–$3,500; average ≈ $1,800 National range across driveway sizes and finishes (Angi, 2026).
400–600 sq ft installed $800–$2,200 Double-car driveway range with labor (Angi, 2026).
Crushed stone $31 / ton median; $20–$48 middle half Material only, before delivery (GoodGravel, October 2026).
Grading and leveling $1–$2 / sq ft Reshaping and preparing the base (HomeAdvisor, 2025 data).
Delivery ≈ $5 / mile if not included Published planning guidance; many yards instead charge by the load or include delivery (HomeAdvisor, 2025 data).
Labor $20–$70 / hour General installation labor; excavation and grading crews can bill at higher hourly rates (HomeAdvisor, 2025 data).
Excavation $40–$150 / hour Removing old material, clearing and preparing the subgrade (HomeAdvisor, 2025 data).

Ranges are national and come from differently dated sources. They are useful for a budget conversation, not for signing a contract. Ask every contractor to price the same scope and list quantities.

Material costs per ton and per cubic yard

Crushed stone had a median price of $31 per short ton in October 2026 — about $42/yd³ at 100 lb/ft³ — compared with $47/ton ($67/yd³) for pea gravel and $106/ton ($155/yd³) for river rock. The conversion is price per ton × density in short tons per cubic yard.

Gravel material prices per ton and derived price per cubic yard
Material Median / ton Middle half / ton Loose density Approx. / yd³
Pea gravel$47$34–$66105 lb/ft³≈ $67
Crushed stone$31$20–$48100 lb/ft³≈ $42
River rock$106$65–$177108 lb/ft³≈ $155
Masonry sand$48$34–$60110 lb/ft³≈ $71

Price per cubic yard = price per short ton × density in short tons per cubic yard (lb/ft³ × 27 ÷ 2,000). Material only, before delivery. Source: GoodGravel, October 2026.

For a driveway surface, crushed stone is the usual starting point because angular faces interlock under compaction. Pea gravel and river rock are rounded and shift under tyres. The full material comparison explains where each one works.

Worked example: 600 sq ft at 4 inches

A 600 sq ft area at 4 inches deep is 200 cubic feet, or 7.41 cubic yards. With a 10% allowance for compaction and waste, the order quantity is about 8.15 cubic yards. At the calculator's crushed-stone density, that is roughly 11.0 short tons.

Illustrative 600 square foot gravel driveway budget scenarios
Scenario What it assumes Planning range
Material-only refresh 8.15 yd³ crushed stone over an existing firm base; 10% waste included; delivery extra. $220–$528 material; at 10 miles, about $50 delivery if charged at $5/mile.
Full contractor install Material, delivery, grading, labor and compaction for a 400–600 sq ft double-car driveway. $800–$2,200
Major site work Soft ground, excavation, drainage, retaining, long haul or restricted access. Site-specific; can exceed the installed range above. Get itemized quotes.

The material-only figure is arithmetic from the published per-ton range, not a quote. It excludes equipment rental, edging, geotextile, base repair and disposal. The installed range is Angi's 2026 national range for a 400–600 sq ft driveway.

The gap between the two rows is the point: on a small driveway, labor and site preparation can cost more than the stone. A quote that lists only tons and a per-ton price is not a complete comparison.

What drives the final price

Area and depth

Area and depth drive the stone quantity: doubling the depth roughly doubles the stone, the deliveries and the compaction time.

Base preparation

Excavation, grading and a compacted base course are separate from the surface stone. Soft or wet ground may need geotextile and thicker layers.

Material and haul distance

Decorative stone can cost several times more than crusher run. Distance from the quarry adds trucking and may trigger a minimum load charge.

Access and slope

A truck that cannot reach the site means bulk bags, a smaller vehicle or more hand work. Slopes need shaping and drainage to prevent washout.

Drainage

Grading away from structures, a crown, culverts or a French drain can add cost, but skipping them usually costs more later.

Edging and containment

Without an edge, stone migrates into beds and lawns. Edging is usually priced by the linear foot, not the square foot.

How to estimate the stone for your driveway

Measure the finished area, multiply by depth in feet, divide by 27 for cubic yards, then apply the material's density and a 10% allowance.

  1. Measure the finished area. Length × width for a rectangle; split an L-shape into two rectangles; use the diameter for a circle.
  2. Choose the depth. Use 4–6 inches of compacted surface gravel for a residential driveway, or 2–3 inches for a path. Calculate the base layer separately.
  3. Convert to cubic yards. Area (ft²) × depth (ft) ÷ 27. A 600 sq ft area at 4 inches is 7.41 yd³.
  4. Apply the density. The calculator converts cubic yards to short tons using the selected material's loose density.
  5. Add the allowance. About 10% extra, or up to 15% for loose, sloped or soft sites.
  6. Price it with a local quote. Multiply the order weight by the supplier's per-ton price, then add delivery and site work.

Use the calculator: enter the driveway dimensions and depth once, then compare the volume, weight and bag count for each material. Open the free gravel calculator. The calculator does not add waste automatically, so add it to the order quantity.

How to compare gravel driveway quotes

Ask for a written, itemized scope rather than a single lump sum. The following lines make quotes comparable and expose the assumptions that change the price.

  • Area, depth and calculated volume, with the waste allowance shown separately.
  • Material name, gradation or specification, and the density used to convert volume to weight.
  • Tons or cubic yards supplied, price per unit, and whether delivery is included.
  • Base preparation: excavation depth, grading, geotextile, and compaction in lifts.
  • Drainage work, edging, culverts and disposal of spoil or old surface material.
  • Tax, permit requirements, start date and payment schedule.

Be cautious of a quote that cannot state the tonnage, the base depth or the compaction method. Those are not administrative details; they are the difference between a driveway and a pile of stone. Verify licensing and insurance where your state or locality requires it.

Ways to reduce cost without skipping the essentials

The biggest savings come from a smaller, simpler layout and local material; do not cut base depth, drainage or compaction to hit a budget.

Price the quantity before you call a supplier

Enter the driveway dimensions, choose a material and get the volume, weight and bag count in seconds.

Open the gravel calculator

Frequently asked questions

What is the average cost of a gravel driveway in 2026?

Angi's 2026 gravel driveway guide reports a national average of about $1,800, with most homeowners paying between $500 and $3,500. HomeAdvisor's published planning range is $1.25 to $4.00 per square foot installed. These are national ranges, not a quote for a specific property.

How much does a 600 square foot gravel driveway cost?

Angi's 2026 size table puts a 400 to 600 square foot double-car driveway at $800 to $2,200 installed. For the material alone, 600 square feet at 4 inches is about 7.41 cubic yards; with a 10% allowance that is 8.15 cubic yards, or about 11 tons of crushed stone. At the October 2026 median that is roughly $341, with a middle-half range of $220 to $528 before delivery.

How much does gravel cost per ton in the U.S.?

GoodGravel's October 2026 published-price data gives a median of $31 per ton for crushed stone ($20 to $48 middle half), $47 for pea gravel ($34 to $66), $106 for river rock ($65 to $177) and $48 for masonry sand ($34 to $60). These are material-only prices before delivery.

How much does gravel delivery cost?

Delivery is often included in a delivered per-ton price, but when it is billed separately HomeAdvisor's planning guidance is about $5 per mile. Many yards charge by the load or apply a minimum order, so ask for the delivery line separately and confirm the truck size and access requirements.

Is it cheaper to build a gravel driveway yourself?

Doing the spreading and compaction yourself can remove the labor line, but it does not remove the material, delivery, base preparation, equipment rental or disposal costs. It also depends on having the time, tools and physical capacity for the work. Compare a DIY material quote with a fully installed quote that lists the same scope.

How deep should a gravel driveway be?

A common residential build-up is 4 to 6 inches of compacted gravel over a prepared base, installed in 2 to 3 inch lifts. Paths usually need 2 to 3 inches. Heavy vehicles, poor drainage or a soft subgrade may need a thicker engineered base; confirm the specification with a local contractor or supplier.

Sources and method

Price per cubic yard and the 600 sq ft example are arithmetic from the published ranges, not customer invoices. We do not invent local quotes or case studies. Labor markets, quarry distance, site access and the scope of base work vary enough that a local itemized quote is the only reliable number. This page is independent: we do not sell aggregate or earn a commission from suppliers. If you find an error, please send the page and the source.